Table of Contents
Advertisement
9.9
System Log
The system records all the actions in its internal memory and displays it on the Current Log, but due to
limited memory the logs will be overwritten. Enable remote log if you wish to keep all the logs.
Enable Remote Log:
Server Name – Insert the network address of the system log server. Enter the address without any
leading characters, such as http://
Server Port – Default is 514. Change the value if your system log server is set up differently.
Remote log uses System Log Protocol, which is a standard for forwarding log messages in an IP network –
allowing your camera, the System Log sender, to send small text message to the System Log server.
3CDaemon by 3Com Corporation is a system log server that you may use for remote log (download here).
After installing 3CDaemon, the main window prompt and you can start to receive logs from the camera.
45
Advertisement
Table of Contents
