Table of Contents
Advertisement
Action:
Define the action to be done when the camera has been triggered.
Send Image – Instructs the camera to send out images. You will need to specify whether you want
to use FTP, network storage or SD card. Make sure that the servers are set up before using it.
Send Notification – This action type uses the HTTP event server. You can use this to have the
camera trigger a script on a server.
Activate Digital Output – Allows you to perform an action with the camera's digital output. You
may also specify the duration you want the camera to trigger the event.
PTZ Action – When triggered, the camera will move to a preset position or run a predefined tour.
Schedule:
Select the schedule for the above Event settings to be active. You may choose one of the available or
schedule, or configure another schedule on the schedule menu (see section 8.4).
31
Advertisement
Table of Contents
