Nidec-Shimpo FGE-0.5XY Operation Manual

Series FGE-XY Force Gauges
Operation Manual
Do not operate or store instrument in the following
locations:
Explosive areas, near water, oil, dust or chemicals; ar-
eas where the temperatures can exceed 104°F
(40° C)
Take precaution to not drop the force gauge. Damage
to the sensor may occur.
Do not modify, disassemble or attempt to repair the
unit. Send to the factory for proper repair.
If upon delivery damage to the unit is detected, do not
operate the unit. Notify the shipping carrier immedi-
ately to obtain damage claim instructions.
Only measure forces that are in line with the measur-
ing shaft. Do not attempt to take any measurements
(tension or compression) at any angle. Failure to keep
measurements in line will damage the instrument.
The Series FGE-XY Digital Force Gauges combine a rugged, ergo-
nomic and compact design with exceptional accuracy to provide
a solid force testing instrument. These instruments are utilized in
a variety of applications such as, incoming quality inspection, fin-
ished goods testing, R&D or almost any portable or force stand
testing requirement.
Simple one button adjustment alters units, while pressing the
peak button quickly produces the highest recorded value during
the test. The 180° reversible display combined with the adjustable
o f c r e i d e r t c o i n a n d d u l a a l b
excel in both compression and tension applications in any direc-
tion. Models are available from 0.5 lb to 200 lbs ranges providing
a large offering for various testing requirements.
Typical applications include wallboard, wire pull, wire crimps, trig-
ger pull, brake pedal, aerospace ceramic, springs, food ripeness,
corrugated paper strength, blister pack, medical component,
muscle strength, ergonomic testing, adhesives, syringe plunger,
needle sharpness and many more.
e e l d k e y p a d e n a b e l h t e F G
NIDEC-SHIMPO INSTRUMENTS
E X - Y o t