Philips MX6050D Service Manual page 11

Dismantling of the Tuner PCB
1) Loosen 10 screw " D " at the back panel as shown in figure
7 .
2) Loosen 6 screw " E " on the top of main board as shown in
figure 8.
3-2
D
Figure 7
E
Figure 9
SERVICE POSITIONS
Service position A
Note: In some service positions the components or copper patterns of one board may risk touching its neighbouring pc
boards or metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
Service position B
3-2