Remote Control Functions - Sanyo XT-49S7200F Owner's Manual

Remote Control Functions

Most of your television's functions are available via the menus that appear on the
screen. The remote control supplied with your set can be used to navigate through
the menus and to configure all the general settings.
(On/Off button) Turns the TV on or off.
POWER
INPUT When short press
/ to select the desired option , then press
OK button to select.
USB
(MUTE) Reduces the TV's volume to its minimum level. Press again
MUTE
to restore the volume.
PICTURE Toggles through the picture preset settings: Vivid,Sports, Standard
Cinema,Soft,User.
Toggles through the sound modes: Music, Cinema,Standard, Speech
SOUND
and User.
AUDIO ONLY Press to select Audio Only Mode on or off.
SLEEP
MENU
Brings up the menu system.
RETURN Exit the menu and return to the previous menu.
(up, down, left and right direction buttons) Highlights different items
in the menu system and adjusts the menu controls.
OK Confirms your selection.
Displays the status information.
INFO
EXIT Exits the menu system.
This key will function as backward play in USB.
This key will function as forward play in USB.
This key will function as previous song, video, picture in USB.
This key will function as next song, video, picture in USB.
This key will function as play & pause in USB mode.
This key will function as stop in USB mode.
VOL +/- Increases or decreases the TV's volume.
CH <> Scans up or down through the current channel list.
0-9 (numeric buttons) Enters channel numbers.
This key will function to freeze the picture except USB.
FREEZE
ASPECT Aspect Ratio : Selects the picture size 4:3, 16:9, Zoom1, Zoom2,
Full and Just Scan.
Note:Some options may not be selectable for certain signal sources.
opens the Input
9
Introduction