Canon EOS REBEL T7i Instruction Manual page 46

3 Setting the Date, Time, and Zone
46
Press <0> again.

Press the <W> <X> keys to select

the time zone, then press <0>.
If your desired time zone is not listed,

press the <M> button, then
proceed to the next step to set it (with
the time difference from the
Coordinated Universal Time, UTC).
To set the time difference from UTC,

press the <Y> <Z> keys to select a
parameter (+/-/hour/minute) for [Time
difference].
Press <0> so <r> is displayed.

Press the <W> <X> keys to set it,

then press <0>. (Returns to <s>.)
After entering the time zone or time

difference, press the <Y> <Z> keys
to select [OK], then press <0>.
Set the date and time.
4
Press the <Y> <Z> keys to select

the number.
Press <0> so <r> is displayed.

Press the <W> <X> keys to set it,

then press <0>. (Returns to <s>.)