Canon EOS REBEL T7i Instruction Manual page 47

The date/time/zone settings may be reset in the following cases. If this
happens, set the date/time/zone again.
• When the camera is stored without the battery.
• When the camera's battery becomes exhausted.
• When the camera is exposed to below freezing temperatures for a
prolonged period.
The set time and date will start from when you select [OK] in step 6.

Even if [52: Auto power off] is set to [4 min.] or less, the auto power off

time will be approx. 6 min. when the [52: Date/Time/Zone] setting
screen is displayed.
After changing the time zone or time difference setting, check that the

correct date and time are set.
3 Setting the Date, Time, and Zone
Set the daylight saving time.
5
Set it if necessary.

Press the <Y> <Z> keys to select

[Y].
Press <0> so <r> is displayed.

Press the <W> <X> keys to select

[Z], then press <0>.
When the daylight saving time is set

to [Z], the time set in step 4 will
advance by 1 hour. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
Exit the setting.
6
Press the <Y> <Z> keys to select

[OK], then press <0>.
 The date/time/zone and daylight
saving time will be set and the menu
will reappear.
47