Canon EOS REBEL T7i Instruction Manual page 434

3 Menu Settings
5: Set-up 2 (Yellow)
Auto power off
LCD brightness
LCD off/on button*
Date/Time/Zone
Language K
Viewfinder display*
* Not displayed for Live View shooting or movie shooting.
5: Set-up 3 (Yellow)
GPS device settings
Video system
Touch control
Beep
Battery information
Sensor cleaning
Cautions for Using GPS Receiver GP-E2 (sold separately)
Check if your country or area allows the use of GPS and follow any legal

regulations.
Update the GP-E2's firmware to Version 2.0.0 or later. (Using the cable

for connection is not possible with firmware versions earlier than Version
2.0.0.) When updating the firmware, an interface cable (sold separately,
p.427) must be used. For how to update the GP-E2's firmware, refer to
the Canon Web site.
Note that the digital compass cannot be used with this camera. (Shooting

direction will not be recorded.)
434
10 sec/30 sec / 30 sec. / 1 min. / 2 min. /
4 min. / 8 min. / 15 min. / Disable
Adjust the brightness (seven levels)
Shutter button / Shutter/DISP / Remains on
Date (year, month, day) / Time (hour, min., sec.) /
Daylight saving time / Time zone
Select the interface language
Electronic level: Hide / Show
Grid display: Hide / Show
Flicker detection: Show / Hide
Settings available when the GPS Receiver
GP-E2 (sold separately) is attached
For NTSC / For PAL
Standard / Sensitive / Disable
Enable / Touch n / Disable
Remaining capacity / Recharge performance
Auto cleaningf: Enable / Disable
Clean nowf
Clean manually
Page
313
314
326
45
48
72
74
75
-
357
68
312
407
327
331