Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Equinox Systems Shard
Summary of Contents for Equinox Systems Shard
- Page 1 Shard User Manual Order codes: EQLED367 - Black Housing EQLED367A - White Housing...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk Shard User Manual... - Page 3 Product overview & technical specifications Shard This high output moonflower is powered by a 60W Osram Ostar™ quad-colour RGBW LED. The high-tech Shard produces an intense array of colours combined with pin sharp beams. Several built in shows allow the user to select fast energetic movements and colour changes or a slow constant rotation to emulate a mirror ball effect. The unit features sound active, master/slave and DMX modes along with built-in programs selectable via the 4 button display panel on the rear of the unit. Additionally the unit can be controlled using a CA 8 controller (sold separately). • 1 x 60W Osram Ostar™ quad-colour LED (RGBW) • DMX channels: 1/4 or 7 selectable • Sound active and master/slave modes plus built-in programs • 0-100% dimming and variable strobe • Optional CA 8 controller • Supplied with hanging bracket • 4 push button menu with LED display • IEC power input/output • 3-Pin XLR input/output • Convection cooled Specifications Power consumption Power supply 100~240V, 50/60Hz Fuse T1A 250V Dimensions 292 x 315 x 210mm Weight 3.5kg Order codes EQLED367 - Black Housing EQLED367A - White Housing 315mm 210mm www.prolight.co.uk Shard User Manual...
-
Page 4: Technical Specifications
CONTROL INPUT DMX INPUT POWER INPUT: 100-240V~50/60Hz FUSE: T1A 250V SAFETY EYE 01 - Earth point 05 - Microphone 09 - IEC power output In the box: 1 x fixture, 02 - On/off switch 06 - 3-Pin DMX input 10 - Fuse T1A 250V 1 x power cable, 03 - LED display 07 - 3-Pin DMX output 11 - CA 8 control input & 1 x user manual 04 - Function buttons 08 - IEC power input 12 - Safety eye www.prolight.co.uk Shard User Manual... - Page 5 Display invert d S I p t e S t Fixture test t e N p Fixture temperature F h - s - - - - Fixture hours u e r u - - Software version www.prolight.co.uk Shard User Manual...
- Page 6 010-120 Clockwise rotation (fast-slow) 010-120 Clockwise rotation (fast-slow) 121-134 No rotation CH2 121-134 No rotation 135-245 Counter-clockwise rotation (slow-fast) CH3 135-245 Counter-clockwise rotation (slow-fast) 246-250 No rotation 246-250 No rotation 251-255 Sound active 251-255 Rotation via sound 000-255 Strobe (slow-fast) 000-255 Red (0-100%) 000-015 LED off 000-255 Green (0-100%) 016-255 LED on 000-255 Blue (0-100%) 000-255 White (0-100%) www.prolight.co.uk Shard User Manual...
-
Page 7: Master/Slave Mode
Sh 8 “DOWN” buttons to choose between . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Please note: Show 0 is a random show mode where it runs through all the other build-in shows. All shows apart from Show 2 react to sound. Show 2 is a slow moving colour change show which doesn’t react to sound. Sound active: To access the sound active setting, press the “MENU” button and use the “UP” and “DOWN” buttons on SoUn the rear of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between or . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Sound sensitivity: To adjust the sound sensitivity, press the “MENU” button and use the “UP” and “DOWN” buttons on the Sens rear of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between . Press the “ENTER” button to confirm the setting. Value: 0 - 100 (0 = low, 100 = high) To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Shard User Manual... -
Page 8: Fixture Temperature
. Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Fixture test: To access the fixture test setting, press the “MENU” button and use the “UP” and “DOWN” buttons on test the rear of the unit to show on the LED display. Now press the “ENTER” button. The unit will now run through its tests (colours, full on and then motor rotation). To exit out of any of the above options, press the “MENU” button. Fixture temperature: To access the fixtures temperature, press the “MENU” button and use the “UP” and “DOWN” buttons on teNp the rear of the unit to show on the LED display. Now press the “ENTER” button. The unit will now display the fixtures temperature. To exit out of any of the above options, press the “MENU” button. Fixture hours: To access the fixtures usage time, press the “MENU” button and use the “UP” and “DOWN” buttons on Fh-S the rear of the unit to show on the LED display. Now press the “ENTER” button. The unit will now display the fixtures usage time (hours). To exit out of any of the above options, press the “MENU” button. Software version: To access the fixtures software version, press the “MENU” button and use the “UP” and “DOWN” buttons on the rear of the unit to show on the LED display. Now press the “ENTER” button. The unit will now display the fixtures software version. To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Shard User Manual... - Page 9 Operating instructions CA 8 function: The unit has a CA 8 remote control input on the rear. This may be used with the CA 8 hand controller (sold separately) to control the unit. Please see functions below. Blackout - By pressing the Stand By button the fixture will blackout. Mode - Use this button to put the fixture into strobe, auto or show modes. Strobe mode (LED off) Auto mode (LED on) Show modes (LED flashing) Function - Once you have chosen the mode you require use this button to set the strobe program/auto mode speed or show modes. Strobe mode - 1. Synchronous strobe 2. Two light strobe 3. Strobe via sound Auto mode - Rotation speed (1-9) Show modes - Shows 1-8 www.prolight.co.uk Shard User Manual...
-
Page 10: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Shard User Manual... -
Page 11: Line Termination
5-pin XLR (male) 3-pin XLR (female) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Shard User Manual... -
Page 12: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Shard User Manual...