spinflo INTEGRILL 5500-4BG User And Installation Instructions

Build in grilling oven for use with liquid petrolium gas

Table of Contents

Download this manual

BUILD IN GRILLING

INTEGRILL MODEL 5500-4BG

•

User and Installation Instructions

PLEASE READ THOROUGHLY and keep for future

SPINFLO LIMITED, 4-10 Welland Close, Parkwood Industrial

Estate, Rutland Road, Sheffield S3 9QY, ENGLAND.

More information https://www.caravansplus.com.au

OVEN

FOR USE WITH LIQUID PETROLIUM GAS

WARNING

Only use this appliance in a well ventilated area.

Read the instructions before use.

This appliance must be installed by an

authorised person.

reference.

FOR USE IN AUSTRALIA

TEL: + 44 114 273 8157

FAX: + 44 114 275 3094

Table of Contents

Need help?

Do you have a question about the INTEGRILL 5500-4BG and is the answer not in the manual?

Page 1 User and Installation Instructions PLEASE READ THOROUGHLY and keep for future reference. FOR USE IN AUSTRALIA SPINFLO LIMITED, 4-10 Welland Close, Parkwood Industrial Estate, Rutland Road, Sheffield S3 9QY, ENGLAND. TEL: + 44 114 273 8157 FAX: + 44 114 275 3094...
Page 2 BUILD IN GRILLING OVEN MAINTENANCE This appliance needs little maintenance other than cleaning. All parts should be INTEGRILL MODEL 5500-4BG cleaned using warm soapy water. Do not use abrasive cleaners, steel wool or cleansing powders. When cleaning the burner ring it is essential to ensure that the INSTALLATION INSTRUCTIONS holes do not become blocked.
Page 3 A rubber connection must not be used After connection the appliance must be tested for soundness COOKING SHELF POSITION DISH This appliance is suitable for use on Fast grilling Conventional grilled food only! PROPANE GAS ONLY 2.75Kpa. It is important that the regulator should be set to the correct pressure for the type of gas Slow grilling/fast baking Pastries, dough being used.
Page 4 HOTPLATE BURNER burner for at least one minute. CAUTION: GLASS LIDS MAY SHATTER WHEN HEATED. TURN OFF ALL BURNERS AND GRILL BEFORE SHUTTING THE LID. Ensure gas cylinder is connected and turned on. In the event of a gas smell turn off at cylinder and contact supplier.