Using Browser - Zte V9C User Manual

V9C User Manual
Turn on Wi-Fi
1. Tap Home Key >
2. Select the Wi-Fi check box to turn Wi-Fi on.
Add a Wi-Fi network
1. Tap Home Key >
The Wi-Fi network names and security settings (open network or secured network) of detected Wi-Fi
networks are displayed in the Wi-Fi networks section.
2. Tap a network to connect.
If you select an open network, you will be automatically connected to the network.

If you select a secured network, you will need to input the wireless password.

Check the Wi-Fi network status
You can check the Wi-Fi network status from the status bar and wireless controls.
1. Check the icon in the status bar.
2. Tap Home Key >
network that the device is currently connected to.
You can check the network status from the pop-up window.

Using Browser

You can use your Browser to browse most of the websites. Some web pages may not be displayed
properly as some specific web page technologies, such as Flash, are not supported by the browser. Your
V9C will automatically create an EDGE or GPRS/3G connection for you while browsing web pages.
> Settings > Wireless & networks.
> Settings > Wireless & networks > Wi-Fi settings.
> Settings > Wireless & networks > Wi-Fi settings, then tap the wireless
Confidential and Proprietary Information of ZTE CORPORATION 35