Yamaha RX-A 3070 Quick Start Manual page 13

3
Confirm that the unit is turned on, and tap "Next".
4
Press and hold the CONNECT button on the front
panel of the unit for 5 seconds, as instructed by
the app.
5
Follow the app's on-screen instructions to
configure network settings.
When a connection has been established, "Completed" will be displayed
in the front display of the unit.
Network connection with the MusicCast CONTROLLER app is now complete,
and the unit has been registered as a MusicCast-enabled device.
SCENE
ON SCREEN OPTION TONE CONTROL
1 2 3 4
(CONNECT)
PROGRAM MULTI ZONE
ENTER
ZONE 2 ZONE 3 ZONE 4 ZONE CONTROL
RETURN DISPLAY
PHONES
USB
5V 1A YPAO MIC SILENT CINEMA L AUDIO R
B
Using WPS push-button
configuration
Wireless connection can be configured with one push of the WPS button on
the wireless router (access point).
1
Press and hold INFO (WPS) on the unit's front
panel for more than 3 seconds.
SCENE INFO (WPS) MEMORY
1 2 3 4
MULTI ZONE
FM AM
ZONE 2 ZONE 3 ZONE 4 ZONE CONTROL
L AUDIO R HDMI IN
"Press WPS button on Access Point" will be displayed in the front display.
2
Push the WPS button on the wireless router.
When a connection has been established, "Completed" will be displayed
in the front display.
Note
If "Not connected" is displayed, repeat the process from step 1 or try another
connection method.
PRESET
TUNING
13
En