Table of Contents
Advertisement
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in programme
selection mode.
•
If the salt indicator is on, fill the salt
container.
ADDING DETERGENT
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
ADDING MULTI-TABLETS
•
Adjust the water softener to the lowest level.
THE AUTO OFF FUNCTION
This function decreases energy consumption by deactivating automatically the appliance when it is not
operating.
The function comes into operation:
10
1
2
1
2
1
2
•
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and the degree of soil.
A
B
Advertisement
Table of Contents
