Assembly - Gardena 9807 Operating Instructions Manual

Supply lines must be lighter than:
– common rubber lines (H 05 RNF),
if rubber-insulated;
– common PVC-coated lines (H 05 WF),
if insulated with PVC.
v O nly connect the device to a mains circuit
which is equipped with a residual current
device (RCD) with a maximum release current
of 30 mA.
In Switzerland the use of a residual-current
device is obligatory.

3. Assembly

Assembling the trimmer:
2
1
ß
R
4
3
7
8
14
CAUTION!
The trimmer may only be operated provided that the
protective cover
1. Pull the lock
additional handle
of the snap-fits
the additional handle
the grooves
snap them into the holder
2. From the front, push the plant
8
guard into the upper groove
of the trimmer head
In doing so, ensure that the
installed bow can rotate
freely (i. e. insert the bow with
the kink pointing upwards).
3. Place the protective cover
top of the trimmer head
4. Turn the protective cover
until it can be pushed over the
trimmer head entirely (the two
ß
arrows
A1
from each other).
9 5. Rotate the protective cover
anti-clockwise until it audibly
engages.
Warning! This unit makes an electromagnetic
field while it operates. This field may under some
conditions interfere with active or passive medi-
cal implants. To decrease the risk of conditions
that can possibly injure or kill, we recommend
persons with medical implants to speak with
their physician and the medical implant manu-
facturer before operating.
Warning! Keep toddlers away when you assem-
ble the unit. Small parts can be easily swallowed.
There is also a risk that the polybag can suffocate
toddlers.
0
is assembled.
1
belonging to the
2
, push in both
3
belonging to
2
and, with
ß
pointing forwards,
R
4
.
9
7
.
0
on
7
.
0
ß
, are directly across
A2
0
ß
A2
ß
A1
0