Fujitsu B24-9 WE Operating Manual page 47

Having this problem?
Picture position not correct
Picture is shaking
Picture is wrongly adjusted
Picture disturbances (vertical lines)
Picture disturbances (horizontal lines, picture
noise)
The screen becomes darker
Fujitsu
Check the following points:
The monitor recognises an undefined mode (see
chapter "Technical specification", Page
► Run the function Auto adjust (see Chapter
"Setting screen display", Page
► Check whether the data cable for the
monitor is correctly screwed into the monitor
port on the computer.
► Run the function Auto adjust (see Chapter
"Setting screen display", Page
► Run the function Factory Recall (see Chapter
"Advanced setting functions", Page
The Auto Processing message appears.
► Run the function Auto adjust (see Chapter
"Setting screen display", Page
► Run the function Auto adjust (see Chapter
"Setting screen display", Page
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
► Contact our Service Desk.
Troubleshooting
44).
22).
22).
26).
22).
22).
43