Memory Module - HP ProOne 490 G3 Maintenance And Service Manual

Memory module

1. Prepare the computer for disassembly (see
2. Remove the stand assembly (see
3. Remove the rear cover (see
4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
5. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
20 Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Stand assembly on page
Rear cover on page 18).
16).
17).