Troubleshooting Guide - Curtis RCD822 User Manual

Troubleshooting guide

In case of trouble with the unit , please look through this chart and see if you can solve the problem by yourself before calling
your dealer .
Problem
Power does not come on when the
power switch is pressed
No sound comes out of the speakers
The sound is noisy
The cassette can not be inserted
No sound from tape
The sound is distorted or faint
Can not listen to any station , or signal
appears weak
The sound is distorted
Play stop immediately after starting to
pl y the CD , or play pauses or stops a
during play
No sound
Specific CD is noisy , or playback stops
or skips
Cause
Unit is unplugged
The volume is turned down (to MIN)
The input selector does not match the
playback source
The unit is too close to a TV set or
another similar appliance
The cassette tape is not inserted
properly or be inserted reversely .
The tape heads are dirty
The tape heads are dirty
The station is not tuned in properly
A TV set is being used nearby
The antenna is not oriented properly
The CD is inserted upside down
The CD is dusty or dirty , or there is
condensation on the CD
The CD player is paused
The CD is scratched , damaged or
warped
The disc is very dirty
12
Solution
Connect the unit to the AC power
supply
Adjust the volume
Re-select the input source
Turn off the TV or other appliance ,and
relocate the unit
Insert the cassette tape correctly
Clean the tape heads
Clean the tape heads
Tune in the station correctly
Turn off the TV set
Re-orient the antenna until reception
improves
Insert the CD with the printed side
upper most
Clean and dry the CD
Press the PLAY / PAUSE button
The CD should be changed
Clean the CD