Steam Ironing; Shock Steam; Vertical Steam - Beko SPA7131P User Manual

Operation
3
In order to prevent
bright stains that
may
synthetic
C
such as silk, iron on
the reverse side of
the fabric. Do not use
the water spraying
feature in order to
prevent the stain
formation.

3.4 Steam ironing

1. Fill the water reservoir (see. 3.3).
2. After the thermostat indicator
light (10) goes out, press the
steam trigger (9).
The
an electronic Anti-
Drip sensor. If the
C
temperature is not
high enough you may
not get sufficient
amount of steam
when you press the
steam trigger (10).
Steam Iron / User Manual
form on
fabrics
product has

3.5 Shock steam

1. Fill the water reservoir (see. 3.3).
2. After the thermostat indicator
light (10) turns off, you can iron
the garments with the powerful
steam by pressing the shock
steam button (7).
WARNING:
this
A
maintained for a
prolonged time water
may come through
the soleplate (3)
together with steam.
WARNING:
order to use the
A
shock steam feature
the
indicator light (10)
should be turned off.

3.6 Vertical steam

You can also use the shock steam
and continuous steam functions in
the upright position (see 3.6). You
can apply steam to your curtains
and your garments on the hanger
with the steam you will get by
pressing the shock steam button
(7) or the steam trigger (9). Keep
the appliance 15-30 cm away from
the garment and curtains.
If
process is
In
thermostat
11 / 16 EN