Steam Iron User Manual SIM6124B 01M-8836843200-4116-01...
Please read this user manual first! Dear Customers, Thank you for selecting a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions invalidates the granted warranty. 1.1 General safety • This appliance complies with the international safety standards.
Important instructions for safety and environment • Do not leave the product unattended while it is plugged in. • Unplug the product before filling the water reservoir with water. • Operate and store the appliance on a stable surface. • When the appliance is placed on its base plate, ensure that the surface beneath the plate is level.
Important instructions for safety and environment • Do not attempt to dismantle the appliance. • Your mains power supply should comply with the information supplied on the rating plate of the appliance. • The mains plug is fitted with a 13A fuse. Ensure the same rating fused is used should it need replacement.
Important instructions for safety and environment • Never use the appliance in or near to combustible or inflammable places and materials. • If you keep the packaging materials, store them out of the reach of children. 1.2 Compliance with WEEE Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU).
Important instructions for safety and environment 1.5 Plug Wiring The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not to be used until a replacement fuse cover has been fitted.
Your iron 2.1 Overview 10 11 2.2 Technical data 1. Power cable 2. Iron base plate Voltage : 220-240V~ 3. Temperature adjustment 50 /60Hz button Power : 2020-2400 W 4. Lime removing button consumption 5. Soleplate Insulation class : I 6.
Operation 3.1 Intended use 3.3 Refilling the water reservoir This appliance is intended only for 1. Unplug the appliance. household use and ironing; it is not 2. Steam setting button (8) off Set suitable for professional use. to “ ” position. 3.2 Initial use 3.
Operation 2. When the appliance reaches the If you don’t know set temperature, thermostat the fabric of your indicator light (11) will turn off garment, first iron and the appliance is ready to use. an invisible part of your garment and 3.5 Temperature and determine a correct steam settings table...
Operation 3.7 Shock steam WARNING: this process When you start to maintained for a iron, shock steam prolonged time water may not emit in may come through your first couple of the soleplate (5) presses. In order to together with steam. obtain shock steam, temperature In order to maintain...
Operation W A R N I N G : Having water in the appliance would be During ironing if the advantageous; you thermostat indicator may use the water light (11) turns on, spraying button (10) before proceeding when necessary. with the shock steam process wait for the 3.11 Automatic light to turn off.
Cleaning and maintenance 4.1 Cleaning 4.2 Lime removal (Self-Clean) WARNING: When finished Lime removal function cleans the with ironing, unplug lime particles accumulated in the the appliance. You steam generator reservoir of the can drain the water appliance. in the reservoir by Use this function once in every 2 opening the refill lid to 3 weeks.
Cleaning and maintenance 4.3 Storage It may take some time for the water to If you do not intend to use the drip from the holes of appliance for a long time, store it the soleplate. carefully. 7. After the reservoir becomes •...
Troubleshooting Although the appliance is plugged in, soleplate (5) does not heat up. The appliance may be connected improperly. >>> Check the plug and power cable (1) of the appliance. Temperature setting button (3) may be at the Min. position. >>> Turn the temperature setting button in the clockwise direction up to the steam sign.
Product Guarantee 12 months breakdown and repair guarantee Guarantor: Beko plc, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8UF The guarantee does not in any way diminish your statutory or legal rights. Your appliance has the benefit of our manufacturer’s guarantee which covers the product for 12 months from the date of original purchase.