Random Play - Curtis RCD313 Operating Instructions Manual

Do not expose a disc to direct sunlight, high humidity, or high temperatures for extended
periods of time. Do not place the Disc on other equipment or near any heat source.
Dust on the pickup lens can lead to erratic operation and interruption of the sound during play.
To clean the pickup lens, open the disc compartment and blow the dust off . Using a camera lens
blower(available at most camera stores)
Note: Do not touch the surface of the lens. Do not allow any liquids on the inside of the
product.
To clean the CD player cabinet, use a soft and damp cloth to wire off the exterior surface.
Never use benzol, benzene, or other strong chemical cleaners, as these could damage the
finish.
PLAYING A COMPACT DISC (CD)
NOTE: Never touch the laser lens inside of the CD compartment. Clean the laser lens with a CD
cleaner disc if it becomes dirty.
1. Slide the Function Switch (CD/RADIO/ALARM) to CD position.
2. Open the CD DOOR by pressing the CD Door OPEN button and insert a CD into the
tray with printed label side facing up.
3. Close the CD DOOR and Press the Power on/off button to turn on the unit, the disc will
rotate for a few seconds and then stop.
4. Use the SKIP >>| & SKIP |<< button to choose a track
5. Press the PLAY/PAUSE BUTTON to start play
6. Press the PLAY/PAUSE BUTTON again to pause play.
Press the PLAY/PAUSE Button one more time to resume play.
7. Press the STOP BUTTON to STOP play.

RANDOM PLAY

In CD stop mode, Press the RANDOM BUTTON once, "RANDOM" will appear on
LCD Display. Press PLAY/PAUSE BUTTON, this will enable random tracks to play.
REVERSE/FORWARD Skip & Search
The CD Reverse(SKIP |<<) and CD Forward Skip/Search(SKIP >>|) Buttons can be used to
jump to a different track number or to scan disc tracks at high speed.
Press the CD Reverse Skip Button (SKIP |<<) once to hear the beginning of the current
track. Press it two (2) or more times to hear previous tracks on the disc.
Press the CD Forward Skip Button (SKIP >>|) to hear the next track on the disc.
Press and hold the CD Reverse Search (SKIP |<<) Button, the current track will be
scanned and move backwards to the previous track(s); When the desired track section is found,
release the button and normal play will resume.
Press and hold the CD Forward Search (SKIP >>|) Button, the current track will be
scanned and move forward to the next track(s); When the desired track section is found, release