Connect The Notebook To The Port Replicator - Fujitsu LIFEBOOK T939 Operating Manual

Working with the notebook

Connect the notebook to the port replicator

► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
► Place the notebook on the port replicator in such way that the connector on the
bottom of the notebook matches the port replicator (1).
► Press down on the notebook's rear corners so that it locks into position (2).
► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (3).
► Connect the power cable (1) to the power adapter provided for the (4)
device, see "Technical data", Page
► Plug the power cable into the mains socket (5).
60
2
3
4
101.
2
1
5
Fujitsu