Connect the notebook to the port replicator
The port replicator does not supply the Notebook computer with power.
The notebook computer must be connected to power using its own mains
adaptor, or it must be sufficiently charged.
If the notebook computer is connected to the port replicator and it is running on battery
power, you may feel a slight tingling when you touch the top of the aluminium housing.
This effect is harmless. The device meets all relevant safety standards.
2
► Connect one end of the USB cable (USB Type-C
Type-C
) on the notebook computer (1).
TM
► Connect the other end of the USB cable (USB Type-C
a data connection (USB Type-C
Disconnecting the notebook from the Port Replicator
► Disconnect the supplied USB cable (USB Type-C
(USB Type-C
) of the notebook.
TM
Fujitsu
1
TM
) on the port replicator (2).
TM
TM
Working with the notebook
) to the USB 3.0 port (USB
) to the USB 3.0 port to provide
TM
) from the USB port 3.0
43