Initial Settings - Kenwood DNX9170DABS Instruction Manual

Basic Operations

Initial Settings

Initial setup
Perform this setup when you use this unit first
time.
1
Set each item as follows.
Locale
■
Select the country for the navigation system.
The language, the distance unit, and the
gasoline unit are set.
1 Touch [Locale].
2 Select the desired country.
Language
■
Select the language used for the control
screen and setting items. Default is "British
English (en)".
1 Touch [Language].
2 Touch [Language Select].
3 Select the desired language.
4 Touch [
].
For detailed operation, see User Interface
Setup (P.65).
10
Display
■
Set the button illumination color.
If it is hard to see the image on the screen
even after adjusting the front panel angle,
adjust the viewing angle.
1 Touch [Display].
2 Touch [Key Color].
3 Select the desired color.
4 Touch [
].
5 Touch [Viewing Angle].
6 Select a viewing angle
7 Touch [
].
For detailed operation, see Display Setup
(P.67).
Camera
■
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For detailed operation, see Camera Setup
(P.61).
DEMO
■
Set the demonstration mode. Default is "OFF"
(DNX9170S/ DNX9170SM/ DNX5170SM)/
"ON" (DNX9170DABS/ DNX5170S).
1 Touch [DEMO] and set ON or OFF.
2
Touch [Finish].
NOTE
• These settings can be set from the SETUP menu.
See Setting Up (P.64).
].