Ricoh C230 Operating Instructions Manual page 94

3. Adding Paper
Paper Thickness
Thin Paper
Plain Paper 1
Plain Paper 2
Middle Thick
3
Thick Paper 1
Thick Paper 2
Thick Paper 3
Thick Paper 4
*1 Print quality will decrease if the paper you are using is close to the minimum or maximum weight. Change
the paper weight setting to thinner or thicker.
• When loading paper in trays 1 4, place the print side up. When loading paper in the bypass tray,
place the print side down.
• When using translucent paper or label paper, make sure to select the appropriate paper type under
Paper Type: Bypass Tray. See "System Settings", Network and System Settings Reference
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and
print quality is unaffected. (Glossy paper and OHP transparencies can produce noise when
delivered.)
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly,
or a misfeed might occur. For details, see Copy and Document Server Reference
Reference
• When you use OHP transparencies, fan them for each use.
• We recommend that you use a 4000 ANSI lumen or brighter overhead projector to project OHP
transparencies.
• When copying or printing onto OHP transparencies, the copy/print speed is slower than usual.
• When copying or printing onto thick paper of 106 256 g/m
copy/print speed is slower than usual.
• Flatten out curled sheets before loading them.
• If multiple sheet feeding occurs, load sheets one by one.
92
*1
Paper Thickness
.
Paper weight
2
52 60 g/m (14 16 lb. Bond)
2
61 80 g/m (16 20 lb. Bond)
2
81 90 g/m (20 24 lb. Bond)
2
91 105 g/m (24 28 lb. Bond)
2
106 130 g/m (28 35 lb. Bond)
2
131 163 g/m (35 lb. Bond 90 lb. Index)
2
164 220 g/m (90 lb. Index 80 lb. Cover)
2
221 256 g/m (80 lb. Cover 140 lb. Index)
2
(28 lb. Bond 140 lb. Index), the
.
, and Printer