Eiki LC-XNB4000N Service Manual page 57

Service mode & Calibration
§ Service mode:
A. System Inf.
A-1: Firmware Version: The firmware version which used at the projector.
A-2: Build Date
A-3: Temp 1
A-4: Temp 2
A-5: Temp 3
A-6: Lamp Timer
A-7: Lamp Total Timer : The total system operation hours which can not be reset.
A-8: Unit Timer
A-9: G Ver
A-10: P Ver
A-2
A-3
A-6
A-7
A-8
A-9
: Firmware build date
: Temperature of inlet ventilation area
: Temperature of projector panel
: Temperature of projector lamp
: The end-user operation hours which can be reset.
: The total unit operation hours which can not be reset.
: Gamma Version
: PIC Version.
58
A-1
A-4
A-10
A-5