Reciprocating Saw; Definitions: Safety Guidelines - DeWalt XR LI-ION DCS367 Original Instructions Manual

English
CORDLESS RECIPROCATING SAWS
DCS367
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Max. power output
No-load speed
Stroke length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
While cutting board
Vibration emission value ah, =
B
Uncertainty K =
While cutting wooden beam
Vibration emission value a =
h,WB
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
4
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e

Reciprocating Saw

DCS367
DCS367
V 18
D WALT declares that these products described under Technical
DC
e
1/10
Data are in compliance with:
2006/42/EC, EN62841-1:2014, EN62841-2-11:2016.
Li-Ion
These products also comply with Directive 2014/30/EU and
W 824
2011/65/EU. For more information, please contact D
min -1 0–2900
the following address or refer to the back of the manual.
mm 28.6
The undersigned is responsible for compilation of the technical
kg 2.27
file and makes this declaration on behalf of D
dB(A) 88
Markus Rompel
dB(A) 99
Vice President of Engineering, PTE-Europe
dB(A) 3
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
28.09.2019
m/s 17.5
2
m/s 5.7
2

Definitions: Safety Guidelines

m/s 22.0
2
m/s 3.1
2
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.





WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e