System Settings; Displaying The "System" Setting Screen; Setting Bluetooth Audio Source Activation; Setting Spotify Source Activation - Pioneer AVH-X5800BHS Owner's Manual

System settings

Displaying the "System" set-
ting screen
1 Press .
2 Touch , and then .
The "System" setting screen appears.
Setting Bluetooth audio source
activation
X5800BHS X4800BS X3800BHS
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On" or
"Off".
Setting Spotify source
activation
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [AV Source Settings].
3 Touch [Spotify] to switch "On" or "Off".

Setting the ever scroll

When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is "Off".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Ever Scroll] to switch "On" or "Off".

Setting the beep tone

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Beep Tone] to switch "On" or "Off".
Setting the auto audio mix
function
You can select whether or not to activate the auto audio mix
X2800BS
function. If the auto audio mix function is activated, this prod-
uct automatically switches between mixing or not mixing the
AV source sound and the sound output from your iPhone or
smartphone according to the mixing property, such as that of the
mixed sound or solo sound of the foreground application on your
iPhone or smartphone.
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Auto Mix] to switch "On" or "Off".

Setting AppRadioOne Sound

You can set where the sound for AppRadioOne is output when it
is used with an Android device.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Input/Output settings].
3 Touch [AppRadioOne Sound].
4 Touch the following settings.
 AVH (default):
The sound is output from the speakers of this unit.

Smartphone:
The sound is output from the speakers of the Android device.
p With an iPhone, the sound is always output from the speak-
ers of this unit.

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
Camera View mode also allows you to check what is behind you
while driving.
Camera for Camera View mode
Camera View can be displayed at all times. Please note that
with this setting, the camera image is not resized to fit, and that
a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the "AV
source selection" screen.
 Refer to Source on the AV source selection screen on page
11
p To set the rear view camera as the camera for Camera View
mode, set "Back Camera Input" to "On".
 Refer to Setting rear view camera activation on page 41
p When using the 2nd camera, set "AV Input" to "Camera".
(AVH-X5800BHS)(AVH-X3800BHS)
 Refer to Starting procedure (for camera) on page 39
p When the camera view of both the rear view camera and 2nd
camera are available, the key to switch the display appears.
Touch this key to switch the display between the rear view
image and 2nd camera image.
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p Immediately verify whether the display changes to a
rear view camera image when the shift lever is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
p If you touch while the camera image is displayed, the
displayed image will turn off temporarily.
Setting rear view camera activation
The default setting is "Off".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
41