Advertisement
enclosed cable
• After the device is recognized by your computer
as a "Removable Disk," press On/Off the button quickly
• If your computer supports webcam functionality,
the device will begin recording as a webcam.
• If your computer does not support this device as a
webcam, you may need to download additional
software. Please visit "amcap.en.softonic.com" to
download a free software called AMCap that may
assist in compatibility. Please note, DGL Group is not
responsible for any software or hardware problems
resulting from the download and use of AMCap.
7. Charging your Device
Connect your device to a computer or a certified
wall charger using the enclosed mini USB cable.
During charging, the red LED will remain lit. When
the battery is fully recharged, the red LED light will
turn off automatically. Charging may take up to 2
hours.
8. Setting Time
• Install micro SD card into device.
• Turn off the camera and connect to a computer.
• Open the Removable Disk.
• Select "tag.txt" and open.
Type in the date/time in the following format
YEAR.MO.DAY - HR:MIN:SEC
Please note, you will need to follow a 24-hour
military time format. Below is an example:
"2012.05.01 23:59:59
The above time string shows the time you want to
set.
Pay
attention
to
the
space
between
Year/Month/Day and Hours Minutes and Seconds.
9. Automatic Shutdown
• When the device is recording, if power is low, the
green LED light will flash 4 times, and the device will
automatically shut down to save battery life.
• When the micro SD card's memory is full, the green
LED light will flash 4 times, and the device will automati-
cally shut down to save the current file.
10. Reset the watch
Press the mode and operating keys simultaneously.
4
Advertisement
