Advertisement
voice recording function.
• The blue light will flash slowly 3 times and turn off.
This will indicate the device is recording voice.
• Press the OPERATION button quickly and the
device will stop recording voice.
Video recording mode:
•At standby mode, quick press the On/Off button, the
blue LED light will flash 3 times consecutively and the
video recording function will start.
• Connect device to a computer to retrieve your
.avi format video.
• To ensure the size and the quality of the video, the
device is programmed to auto-save every 10 minutes
during recording and continue recording.
4. Taking a Photo
• In standby mode, press the operation button quickly.
• The blue light will turn off. The red light will flash
once and turns off.
• The device will save a .jpeg file and return to
standby mode.
Note: To ensure your videos and photos are
adequately lit, ensure the camera is not obstructed
by any objects, and film your subjects with a
distance greater than 18" (50cm). To ensure good
sound, do not block the microphone.
5. Connecting to Computer
• Ensure the device is turned on.
• Using the enclosed USB cable, connect the
device to a computer .
• The computer will recognize the device as a
"Removable Disk"
• During the first connection, please wait 30
seconds while the device installs necessary drivers
onto your computer. Do not disconnect it during
this time.
• After you have reviewed, saved, or deleted any
video, right click on the "Removable Disk" and
select "Eject."
• Do not disconnect the device from your computer
until your device says it is safe to remove.
6. Webcam Usage
• Connect to computer USB interface using the
3
Advertisement
