Visioneer PATRIOT H60 User Manual page 22

® TM
V P H60 / H80
ISIONEER ATRIOT
2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer. Check your
computer's manual for USB port locations.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into
either connection.
3. Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and automatically loads the
appropriate software to run the scanner.
22
I
NSTALLATION
S U ' G
CANNER SER S UIDE