Camera Positioning And Field-Of-View; Pan; Tilt - Bosch FLEXIDOME IP starlight6000 VR NIN-63013 Installation Manual

14 en | Installation
5.5

Camera positioning and field-of-view

The camera module position can be adjusted along three axes and several zoom positions can
be selected.
To help position the camera and set the field-of-view:
1.
2.
3.
4.
S1460
Notice!
Do not expose the image sensors to direct sunlight.
5.5.1

Pan

For horizontal adjustment (pan):
1.
2.
5.5.2

Tilt

For vertical adjustment (tilt):
1.
2.
03.2019 | V2.0 | AM18-Q0711
Connect a monitor to the 2.5 mm jack using the optional monitor cable (S1460) which
provides a CVBS signal (for installation purposes only).
Apply power to the camera.
After power-up, wait a little (about 20 seconds).
Press the Menu button. This stops the IP video stream and enables the service video
analog output.
Reset
Rotate the camera module (1) in the base. Do not rotate more than 180° in either
direction.
Tighten the locking screw (2) with the supplied screwdriver bit.
1
Loosen the two thumbwheels (1).
Swing the camera module between the wings. Do not rotate more than 90°.
Menu
Installation manual
FLEXIDOME IP starlight 6000 VR
Bosch Security Systems B.V.