Arp List - TP-Link TL-WR902AC User Manual

Chapter 4
4. Click Save.
¾ To add IP & MAC Binding entries:
1. Click Add New.
2. Select the Bind checkbox.
3. Enter the MAC address and IP address.
4. Click Save.
¾ To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete
¾ To find an existing entry:
1. Click Find.
2. Enter the MAC address or IP address in the corresponding field.
3. Click Find on this page as shown below.

4. 13. 2. ARP List

To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
in the Modify column.
55