Hotspot Router Mode - TP-Link TL-WR902AC User Manual

Chapter 3
2. Select the LAN IP type of the router or leave the default setting
then click Next.
3. Click Reboot to complete the configuration. Now you can connect your wired-only device to
the router's LAN or LAN/WAN port using an Ethernet cable.
3. 2. 5.

Hotspot Router Mode

1. Select the WAN Connection
select Dynamic IP.
Set Up Internet Connection Via Quick Setup Wizard
Type. When using the router in a hotel room or a small office,
Smart IP for most cases, and
15