Auxiliary Input; Bass Boost - Pyle PPTCM80BTGR User Manual

1. Set the FUNCTION button (12) to PHONO mode and then use an audio cable (not included) with a 3.5
mm stereo plug on each end of the cable.
2. Plug one end of the cable into the AUX-IN jack (30) on the back of the unit ("Aux" will be displayed)
and the other end into the Line-out jack or Headphone jack of your external audio device to be able to
listen to the external source through that system‟s speakers.
3. The volume level can now be controlled through the main unit. Operate all other functions on the
auxiliary device as usual.
Note:
(1). If the Line-Out jack of your external device is connected, you only need to adjust the system‟s volume
control. If your external device‟s Headphone jack is connected, you may need to adjust the volume control
on both your external device and this system to achieve the desired volume.
(2). Press the POWER button (11) to turn off the system when you have finished listening. Don't forget to
switch off the power on your external device as well.

BASS BOOST

Press the BASS button once to the ON position to enjoy a more powerful Bass sound.

AUXILIARY INPUT

BASS BOOST
8