Washing
Basic Method
3
Changing settings
NOTE
●
Do not get laundry caught in the
door.
It can cause damage to the door
seal.
●
Do not put too much laundry into
the drum.
It can cause excessive vibration or
damage to the appliance.
14
2
1
Using optional functions
■To open the door during operation
(The door is locked during operation)
Press "Pause".
(The lock is released with
a click)
●
During spinning process, it may take
about 1 minute for the drum to stop
rotating.
■Preparing
●
Sort the laundry and put it into the
drum. (P.9)
●
Add the detergent. (P.12)
1
Turn on the power.
2
Select a programme.
(P.18, 19)
The required time is displayed.
■Changing settings
■Using optional functions
3
Start operation.
●
Weighing (about 30 seconds)
(Display of
weighing)
Some programmes do not
weigh the laundry. (P.18, 19)
●
Required time display
(recalculated)
(e.g.)
Operation finishes.
(The buzzer sounds and the door
lock is released.)
NOTE
●
Colours can run between clothes,
so remove coloured laundry soon
after the programme finishes.
Changing settings
After selecting a programme, you
can change the following settings.
Temperature ( P.24)
Spin speed ( P.25)
Timer ( P.25)
Using optional functions
After selecting a programme, you
can add the following optional
functions.
Prewash (P.27)
Extra Rinse (P.27)
Easy Iron (P.27)
Speed/Eco (P.27)
Mode (P.26)
(Select and run the wash,
rinse or spin process)
NOTE
●
The range of settings you can
change and the optional functions
you can add vary depending on the
programme.
( P.20, 21)
15