Connecting The Hoses - Panasonic NA-140XR1 Operating & Installation Instructions Manual

Connecting the Hoses

Connect the hoses properly to prevent water leaks.
■Maximum connection distance of hoses and mains lead
Right side connections
Left side connections
Water supply hose
Sink
Rise of drain hose
(max. 100 cm)
40
145 cm
Water supply hose
95 cm
Sink
Drain hose
Rise of drain hose
85 cm (max. 100 cm)
Drain hole
95 cm
140 cm
Drain hose
40 cm
Drain hole
Water supply hose
■ Mains water pressure and water flow
●
Water pressure: 0.03 - 1.0 MPa
If the water pressure exceeds this
value, fit a pressure reducing valve.
●
Water flow from tap: 5 L/min. or
more
■Connecting the water supply hose
CAUTION
●
Do NOT twist, squash, modify or
cut the hose.
●
Tighten the nut firmly.
1 Attach one end of the hose to the
water inlet on the appliance and
tighten by hand.
(Rear of appliance)
Water inlet
Water supply
hose
2 Attach the other end of the hose to
the tap and tighten by hand.
min.
10 mm
3/4"
Hose with water Standard hose
supply valve
3 Turn on the tap slowly and make
sure there are no leaks.
Drain hose
■Draining to a sink or wash basin
CAUTION
Secure the drain hose with an
elbow so that it does not come off
by water pressure during drainage.
Elbow
(supplied)
■Draining to a stand pipe
Stand pipe
■Draining to a drain hole
NOTE
●
Do not twist, pull out or bend the
drain hose.
●
Do not put the hose tip under water.
7
41