Curtis iMODE iP9844 Instruction Manual page 20

Dvd player docking station for ipod video
Table of Contents

Advertisement

Quick Starting Guide
Selecting the Camera Angle
THIS DVD VIDEO PLAYER ALLOWS YOU TO SELECT FROM SEVERAL
DIFFERENT ANGLES.
If the DVD video disc was recorded with multiple angles, you have the option to change
the camera angle of the scene you are watching.
Press the ANGLE button while playing back a scene recorded with multiple angles
(set shift on).
You may only press the ANGLE button when the angle icon is flashing on the DVD
display.
Press the corresponding number of your desired angle.
To Playback iPod
Lift the Dock Release button. Locate the correct holder to use as shown on page 10.
Insert the holder onto the dock and slip the side tabs into place.
Insert the iPod onto the holder.
Gently push down so the connector on the iPod slides onto the connector on the unit.
Press the edge area of the holder down gently (as shown) until it clicks into place.
Once you connect the iPod, it will start charging the battery until it is full. (The iPod can
charge only when the unit is connected with the AC adapter.)
With an iPod connected, turn the unit on by slide the Power button (if it is not on already);
Operate the iPod as per its owner's manual.
For music selections, the sound will be heard through the unit speakers.
For photo selections, the image will be seen on the unit screen.
For video selections, the sound will be heard through the unit speakers and the image
will be seen on the TFT screen.
Make sure to go into the Settings menu of your iPod and set the TV Out setting to ON and
set the TV Signal to NTSC; otherwise, you may not be able to view the videos/ photos on
your external TV.
The photo and video selections are for iPod with video (5th generation). The photo
selection is also suitable for iPod photo.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents