Cleaning The Air Filter Element - Yamaha BANSHEE YFZ350W Owner's Manual

tected against frost and corrosion.
G
If water has been added to the coolant, have
1
a Yamaha dealer check the antifreeze con-
tent of the coolant as soon as possible, oth-
2
erwise the effectiveness of the coolant will
be reduced.
3
12. Install the radiator cap, start the engine, let it
idle for several minutes, and then turn it off.
4
13. Remove the radiator cap to check the coolant
5 level in the radiator. If it is low, add sufficient
coolant until it reaches the top of the radiator,
6
and then install the radiator cap.
14. Start the engine, and then check for coolant
7
leakage.
NOTE:
8
If any leakage is found, have a Yamaha dealer
9
check the cooling system.
15. Install the radiator cover by installing the bolts.
10
EBU23620
11

Cleaning the air filter element

The air filter element should be cleaned at the in-
tervals specified in the periodic maintenance and
lubrication chart. Clean the air filter element more
frequently if you are riding in unusually wet or dusty
areas.
NOTE:
There is a check hose at the bottom of the air filter
case. If dust or water collects in this hose, empty
the hose and clean the air filter element and air fil-
ter case.
1. Air filter case check hose
1. Remove the seat. (See page 4-11.)
2. Remove the air filter case cover by unhooking
the holders.
8-16
1