Flash Mode - Sony DSC-RX10M2 How To Use Manual

Help Guide
When using the flash, note the following points.
You cannot use the flash when recording movies.
While charging the flash, the
finished, the indicator lights up.
When an external flash (sold separately) is attached to the Multi Interface Shoe, the state
of the external flash has priority over the flash setting of this product, and you cannot use
the internal flash of this product.
Do not use a commercially available flash with high-voltage synchro terminals or with
reverse polarity, it may cause a malfunction.
[52] How to Use

Flash Mode

You can set the flash mode.
1. MENU →
Menu item details
Flash Off:
The flash does not operate.
Autoflash:
The flash works in dark environments or when shooting towards bright light.
Fill-flash:
The flash works every time you trigger the shutter.
Slow Sync.:
The flash works every time you trigger the shutter. Slow sync shooting allows you to shoot a
clear image of both the subject and the background by slowing the shutter speed.
Rear Sync.:
The flash works right before the exposure is completed every time you trigger the shutter.
Rear sync shooting allows you to shoot a natural image of the trail of a moving subject such
as a moving car or a walking person.
Wireless:
Using a wireless flash creates a shading effect that gives the subject a more 3D appearance
than when using the camera's flash.
This mode is effective when you attach a remote control-compatible external flash (sold
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
indicator flashes. When the charging of the flash is
Using shooting functions
(Camera Settings) → [Flash Mode] → desired setting.
Using the flash