The Power Turns Off Suddenly - Sony DSC-RX10M2 How To Use Manual

Help Guide
lever is locked.
Make sure that the battery is NP-FW50.
[274] Troubleshooting
You cannot turn on the product.
After inserting the battery pack into the product, it may take a few moments for the product
to power up.
Make sure that the battery pack is inserted correctly.
The battery pack will discharge by itself even if you do not use it. Charge the battery pack
before use.
Make sure that the battery is NP-FW50.
[275] Troubleshooting

The power turns off suddenly.

Depending on the product and battery pack temperature, the product may turn off
automatically to protect itself. In this case, a message is displayed on the product screen
before the product turns off.
[276] Troubleshooting
The remaining battery level indicator shows an incorrect
level.
This phenomenon occurs when you use the product in an extremely hot or cold location.
There may be a difference between the remaining battery level indicator and the actual
remaining battery charge. Deplete the battery pack once, then charge it so that the
remaining battery level indicator is reset. The correct remaining battery level indicator may
not be displayed under some operating or environmental conditions.
Battery capacity decreases over time and through repeated use. If decreased usage time
between charges becomes significant, it is probably time to replace it with a new one.
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Troubleshooting Battery pack and power
Troubleshooting Battery pack and power
Troubleshooting Battery pack and power