Sony DSC-RX10M2 How To Use Manual page 38

Hide thumbs Also See for DSC-RX10M2:
Table of Contents

Advertisement

Help Guide
The image quality is set to 60i 17M (FH) .
Actual shooting (movies): Battery life based on repeated shooting, zooming, shooting stand-by,
turning on/off, etc.
Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has
been reached, and then continued by pressing the MOVIE (Movie) button again. Other functions,
such as zooming, are not used.
If the remaining battery is not displayed, press the DISP (Display Setting).
[13] How to Use
Supplying power from a wall outlet (wall socket)
By using the supplied AC adaptor, you can shoot and playback images while the power is
supplied from a wall outlet (wall socket) without using up the battery power.
1. Insert the battery pack into the camera.
2. Connect the camera to the wall outlet (wall socket) with a micro USB cable (supplied)
and an AC adaptor (supplied).
Note
The camera will not activate if there is no remaining battery. Insert a sufficiently charged
battery pack into the camera.
If you use the camera while power is being supplied from a wall outlet (wall socket), make
sure that the icon (
Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If
you remove the battery pack, the camera will be turned off.
Do not remove the battery pack while the access lamp is lit. The data in the memory card
may be damaged.
As long as the power is on, the battery pack will not be charged even if the camera is
connected to the AC Adaptor.
Under certain conditions, power may be supplied from the battery pack supplementarily
even if you are using the AC adaptor.
Do not remove the Micro USB cable while power is supplied from a wall outlet (wall
socket). Before you remove the Micro USB cable, turn off the camera.
Depending on the camera and battery temperature, the continuous recording time may be
shortened while power is supplied from a wall outlet (wall socket).
When using a mobile charger as a power source, confirm that it is fully charged before
use. Also, be careful of the remaining power on the mobile charger during use.
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Preparing the camera
) is displayed on the monitor.
Charging the battery pack

Advertisement

Table of Contents
loading

Table of Contents