Configuring Router; Connecting To Web-Based Interface - D-Link DIR-822 Quick Instillation Manual

Hide thumbs Also See for DIR-822:

Table of Contents

DIR-822

CONFIGURING ROUTER

Start a web browser. In the address bar of the web browser, enter the IP

address of the router (by default, the following IP address is specified:

192.168.0.1). Press the Enter key.

If the error " The page cannot be displayed " (or " Unable to display the

page "/" Could not connect to remote server ") occurs upon connecting to

the web-based interface of the router, make sure that you have properly

connected the router to your computer.

After the first access to the web-based interface you need to change the default

administrator password

Confirmation fields. You may set any password except admin. Use digits,

Latin letters (uppercase and/or lowercase), and characters available on the

keyboard. Then click the Apply button.

Remember or write down the new password for the administrator

account. In case of losing the new password, you can access the settings

of the router only after restoring the factory default settings via the

hardware RESET button. This procedure wipes out all settings that you

have configured for your router.

10 For the hardware version /RU you should also change SSID.

. Enter the new password in the Password and

Quick Installation Guide

Table of Contents

Ac1200