Axle Boots; Brake Light Switches - Yamaha GRIZZLY 350 YFM35FGB Owner's Manual

Table of Contents

Advertisement

1. Locknut
2. Brake lever free play adjusting bolt
4. Tighten the locknut at the brake lever.
5. Check gap "A" again and, if necessary, adjust
it.
TIP
When adjusting the rear brake lever free play:
G
Be sure not to step on the brake pedal.
G
Make sure the brake pedal does not move.
EBU24230

Axle boots

The axle boots must be checked for damage at the
intervals specified in the periodic maintenance and
lubrication chart. Check the axle boots for tears or
damage. If any damage is found, have them re-
placed by a Yamaha dealer.
1
1. Axle boot (each side)
EBU29881

Brake light switches

The brake light, which is activated by the brake
pedal and brake levers, should come on just be-
fore braking takes effect.
8-35
1
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grizzly 350 yfm350fab

Table of Contents