Ubiquiti airMAX Omni AMO-2G10 Quick Start Manual page 6

5. Attach the antenna to the top of the pole. (If the antenna is
attached to a lower point on the pole, part of the signal will
be blocked by the pole.)
Note:
Ø 38 - 76 mm (1.5 - 3.0") pole.
a. Slide a Pole Clamp over each pair of Carriage Bolts.
b. Secure each Pole Clamp with two Serrated Flange Nuts.
c. Tighten all nuts to approximately 25 N-m (18 lb-ft).
The mounting assembly can accommodate a