Adding Ip Cameras - HIKVISION DS-96128NI-I16 Quick Start Manual

Menu > Configuration > Network
2. Select the General tab.
3. In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4
Gateway, MTU and DNS Server.
If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain an IP address
and other network settings from that server.
4. After having configured the general settings, click the Apply button to save the settings.

3.8 Adding IP Cameras

Purpose:
Before you can get live video or record the video files, you should add the network cameras to the connection list
of the device.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the User Manual for activating the inactive IP camera.
Steps:
1. Click to select an idle window in the live view mode.
2. Click the icon in the lower-left corner of the window to pop up the Add IP Camera interface.
Network Video Recorder Quick Start Guide
Figure 3. 10 Network Settings
23