Panasonic DMR-BWT760 Operating Instruction page 12

Easy Setting
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial power on.
3
Select the country you live in, and press
[OK].
• [For_Australia]
If you select "Australia", the "Region Selection" will
appear. Select the region you live in, and press [OK].
• [For_New_Zealand]
If you select "New Zealand", a screen asking you to
restart this unit will appear. Press [OK] to restart it.
Wait until a screen appears again. After the screen
appears, Easy Setting resumes.
4
Follow the on-screen instructions and
perform the settings.
Auto Setup starts.
(This operation may take some time.)
e.g., [For_Australia]
Digital TV Auto Tuning
Progress
This will take about 3 minutes.
RF Ch Channel Name
35
35
Digital TV: 2
5
Clock is set automatically.
If the clock setting screen appears, set the
time manually. (
6
Set "Quick Start" to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
For details, refer to "Quick Start". (
7
Select the aspect ratio that matches the
connected TV.
For details, refer to "TV Aspect". (
When "Easy Setting has been completed."
appears, Easy Setting is completed.
• Select "Yes" to set network settings.
• Select "No" to finish the Easy Setting.
12
SQT1109
CH 6
Type Quality
Digital TV
10
10
Digital TV
Searching
78, Clock)
77)
74)
To stop partway
Press [RETURN
To restart setup (
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Easy Network Setting
Easy Network Setting
After completing "Easy Setting", you can continue
with "Easy Network Setting".
Select "Wired" or "Wireless", then press [OK].
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
Current setting
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Select "Wireless".
Wired
Wireless
69
LAN cable connection ("Wired")
Follow the on-screen instructions to apply your
connection settings.
Wireless LAN connection ("Wireless")
Before beginning wireless connection setup
• Obtain your network name (SSID
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
• The default SSID,
Password (Key) etc., may
be printed on the router.
Select "Search for wireless network" or "WPS
(PUSH button)" and press [OK], then follow the
on-screen instructions and apply the settings.
].
70, Auto Setup)
: Wired
).
§1
e.g.,
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX