Stitch Selector Dial - Singer 3342 Instruction Manual

Stitch Width Dial
The Stitch Selector Dial is used to select the stitch you want to sew. The dial can be turned to the left
or to the right.
For Sewing the Grey Stitch Patterns:
Stitch Width Dial
For Sewing the Blue or Red Stitch Patterns:
Stitch Width Dial
For examples of stitch patterns and further instruction, see the Stitch Reference Guide at www.
singerco.com.
Stitch Length Dial
1. Turn the Stitch Selector Dial until it clicks in
2. Set the Stitch Length Dial according to the
3. For straight stitch sewing, the Stitch Width Dial
Stitch Length Dial
1. Turn the Stitch Selector Dial until it clicks in
2. Set the Stitch Length Dial so that the S1 or S2
3. Set the Stitch Width Dial to a wide setting (4-
Stitch Length Dial
START SEWING

Stitch Selector Dial

Stitch
Selector Dial
place under the dot directly above the dial on
the machine.
length you want. It can be set anywhere
between 0.5 and 4, with 4 being the longest
setting.
can be set at 0 for the center needle position or
6 for the left needle position.
place under the dot directly above the dial on
the machine.
is lined up with the dot above this dial. This
dial must be set at the S1 marking for the blue
stitches or the S2 marking for the red stitches,
or the stitch pattern will not sew.
6). If desired, you can set it to a lower setting,
depending on the look you want.
3
19