Table of Contents
Advertisement
Product Overview
Figure 3
1. Rollbar
2. Fuel cap (both sides)
3. Seat belt
4. Motion control lever
5. Height-of-cut lever
Controls
Become familiar with all the controls before you
start the engine and operate the machine (Figure 3
and Figure 4).
Figure 4
1. Ignition switch
2. Motion control lever
3. Parking brake lever
4. Throttle control
5. Choke
6. Side discharge
7. Front caster wheel
8. Controls
9. Mower deck
10. Parking brake lever
6. PTO Switch
7. Height-of-cut lever
8. Fuel cap
9. Hourmeter
Using the Hour Meter
The hour meter (Figure 5) records the number
of hours the engine has operated. It operates
when the engine is running. Use these times for
scheduling regular maintenance.
1. Hour meter
Using the Fuel Shutoff Valve
The machine has 2 fuel tanks, one on the left side
and the other on the right side. Each tank connects
to a check valve and then to a tee. From there a
common fuel line leads to the engine (Figure 6).
Close the fuel shutoff valve before transporting
or storing the machine.
1. Fuel lter
2. Hose clamp
13
Figure 5
Figure 6
3. Fuel shutoff valve
Advertisement
Table of Contents
