Canon MG2400 series Online Manual page 131

Note
To enlarge/reduce the scanned image, enter values into
(Height) in Output Settings or specify a value (by 1 %) for %. Although the
maximum value available for % depends on the Output Resolution, it can be
specified for up to 19200 dpi (the maximum available output resolution).
• Paper Size (L, A4, etc.) & Monitor Size (1024 x 768 pixels, etc.)
(Width), (Height), and scale cannot be specified. The preview image will be
cropped according to the selected output size and resolution. The portion within the
cropping frame will be scanned at the size of the selected paper/monitor size. You can
drag the cropping frame to enlarge, reduce, or move it while maintaining the aspect
ratio.
• Add/Delete...
Opens the Add/Delete the Output Size dialog box, in which you can specify custom
output sizes.
In the Add/Delete the Output Size dialog box, you can specify multiple output sizes
and save them at one time. Saved items will be registered to the Output Size list and
can be selected, along with the predefined items.
Add
To add a size, select Print or Image display for Destination, then enter Output Size
Name, Width, and Height then click Add. For Unit, you can select inches or mm
when Destination is Print but you can only select pixels when Destination is Image
display. The name of the added size appears in Output Size List. Click Save to save
the items listed in Output Size List.
Delete
To delete an item, select it in Output Size List and click Delete. Click Save to save
the items listed in Output Size List.
Important
You cannot delete predefined output sizes such as A4 and 1024 x 768 pixels.
131
(Width) and