Table of Contents
Advertisement
VIVOTEK
Buttons Configuration
Click the Configure Buttons button, a window will prompt as shown below. Please follow the steps
below to configure your joystick buttons:
1. Select a button number from the Button # pull-down menu.
2. Select a corresponding action, such as Patrol or Preset#.
3. Click the Assign button to assign an action to
the button. You can delete an association by
selecting a button number, and then click the
Delete button.
Repeat the process until you are done with the
configuration of all preferred actions.
The buttons you define should appear on the
button list accordingly.
4. Please remember to click the Save button
on the Client settings page to preserve your
settings.
50 - User's Manual
Tips
If you are not sure of the locations of each button, use
the Properties window in the Game Controllers utility.
Advertisement
Table of Contents
